Ara

Help

Inspections

Help center

Troubleshooting

What each message means and what to try first. Most problems are fixed by reconnecting the glasses.

Quick fixes, in order

  1. ReconnectClose Ara, open it again, tap Connect glasses.
  2. Reset the glassesPut them in the case for a few seconds, take them out, and connect again.
  3. Check Bluetooth and Meta AIBluetooth on, and the glasses show as connected in Meta AI.
  4. Restart the phoneIf none of the above worked.

Messages and problems

You seeTry this
Glasses won't connect, or Meta AI says Ara is offlineUnfold the glasses and keep them near the phone. Check Bluetooth. Reconnect. If Ara offers Update the glasses app, tap it and follow Meta AI.
“Finish linking in Meta AI”Meta AI needs you to approve Ara. Open Meta AI, approve, come back and tap Connect glasses again.
“No video arrived from the glasses”Stop, wait a few seconds, start again. If it repeats, reconnect the glasses.
“Sending failed”Check Wi-Fi or signal, then tap Send to web again. The recording is kept until it's sent.
“No microphone audio was received”In iPhone Settings → Ara, allow the Microphone. Without speech the sheet can't be filled in.
“Unsaved inspection restored”Ara closed before sending. Tap Send to web, or Discard if you don't need it.
Lens buttons don't respondTake the glasses off and on again, or use the phone buttons.
A still is blurry or missingHold still for a second after “take a still”. Check the stills on the Inspections page; you can take more next time.
The sheet has wrong resultsCheck the transcript for what Ara heard. Speak one item at a time with a clear result.
The display is blankDouble-tap your middle finger to your thumb to wake it.
[Add issues from the pilot][Fix]

Still stuck?

Contact support and tell us the exact message. A screenshot of the phone helps most.