Inspections
Record a multi-point inspection hands-free while you talk through the car. Ara fills in the inspection sheet for you.
How it works
1 · RecordThe glasses record video while you say what you find, area by area.
2 · SendOne tap uploads the recording. Ara transcribes it and fills in the sheet.
3 · ReviewThe sheet, video, stills and transcript appear on the Inspections page.
Step by step
- Enter the ROOn the phone, type the RO number (and the VIN if you have it) and tap Look up in myKaarma. The lens shows the RO and the car. If the RO isn't found, it's still saved as typed.
- StartPinch Start inspection in the lens, or tap it on the phone. Recording begins when the lens shows ● REC.
- Walk the carThe lens shows one area's checklist at a time. Press Next area when you move on. See what to say.
- Take stillsSay “take a still” or press Take still. Hold your view steady for a second; the photo is cut from the video.
- Pause if you need toSay “pause recording” or press Pause to step away or talk about something else; say “resume recording” to continue. The paused time is left out of the video.
- Stop and sendPress Stop, then Send to web. Keep Ara open until it says Sent.
- Check the redsAfter sending, the lens shows the red and yellow items Ara found. Look them over before leaving the bay, then tap Done.
Limits
8 minlongest recording
50stills per inspection
15 fpsvideo from the glasses
A recording also stops by itself if the file gets too big to upload. Everything recorded up to then is kept.
Getting good results
- Light the area. Use a work light under the hood and under the car; the camera sees less than you do.
- Look, then talk. Point your head at the part while you describe it, so the video matches what you say.
- Give numbers. Tread in 32nds, pads in millimeters, pressure in psi.
- One car per recording. Stop and send before starting the next vehicle.
The sheet is a draftAra fills it in from what you said. [Who] checks it before anything goes to a customer. See Reviewing inspections.